Description
Sublimation coating is a clear liquid based sublimation coating product that can be brushed, dipped or sprayed to a sublimatable blank item that does not already have the sublimation polymer coating. Not intended for use with fabrics. Instructions for use. 1. Brush Polycoat sublimation coating to mug, plate, ceramic tile, or metals, uniformly. You can also dip the sub blank into the Polycoat sublimation coating. 2. Air dry in a well ventilated area until dry. Place into an oven at 390 F. Constant temperature for 10 minutes. 3. Remove and allow to cool. The blank is now ready.
Coating container comes in average of:
Weight: 900 Grams
Liquid Volume / Weight : 750ml
IMPORTANT NOTICE:
Please be advised due to courier restrictions of chemical items these products we only sell within the United Kingdom
If you address are not in the United Kingdom and you purchase this product your order will be cancelled and your payment refunded
Please only order this product if your delivery address in the United Kingdom
How to use Sublimation Coating?
Introduction:
You could spray directly, scrub, immerse or pour the coating on the surface of products, wait unit the coating to be dry (no longer flowing). Then put products in 200°C oven to heat about 20 minutes. (If 180°C for 30minutes).
1KG coating could spray 8 square meter products (about 300pcs sublimation mug)
It could be used on wood, metal, stone, glasses etc. Which could bear 200°C high temp with 20minutes.
Solution:
If you find the product’s surface become yellow, just because the heating time is too long or temp is too high. If the paper sticks on the surface when you transfer, then the heating time should be shorter.
Usage:
1. You must clean the surface of products first.
2. Then turn on the oven to heat up ceramic materials (such as mugs or plates) to 30-40degree.don’t be too hot. And then take out ceramic materials, this step is just for avoiding dust on mugs or plates before coating (metal & glass &wood material doesn’t need this step)
3. Then spray or pour coating on the products, when the coating spray evenly on the product’s surface, then take out and wait for drying. When there have no coating flowing off, then put them into oven to heat about 200°C oven, 20 minutes.
4. When reaching the time, take out the products. That is ready for coating step.
Sublimation Clear Coating Datasheet (PDF) English
Disclaimer: UK sales only – Please do not order this item on-line for exports due to carrier restrictions we are unable to send aerosols outside the UK
Reviews
There are no reviews yet.